Richards Spur Rock Quarry

Employee was hit with a clevis in the mouth resulting in a busted lip and broken teeth.

Employee was helping other employees carry a metal plate and they dropped it on their finger, fracturing it.

Trying to pry a pulley off, bar slipped and caught their thumb between the two.

EE was shoveling in between the shuttle conveyors of the bottom floor of the Mill. EE was shoveling bent over to avoid the conveyor above EE and twisted after getting a shovel full to throw into the bin. EE then felt a shock in the lower back.

Shoveling in the bin and tweaked back.

EE was moving the electric 3 1/2 ton hoist with about 25' of chain on the overhead trolley system for picking up parts.

Employee was lifting a ladder out of a hole and strained back.

employee smashed EE's finger between 2 rocks and received 2 stitches

Employee was bent over the feeder gate for a prolonged time and when employee stood up, had pain in lower back.

Either a hose or cooler burst (unknown at this time) spraying the turbo with compressor oil leading to a fire on the rig (extinguished in under 30 minutes). Driller leapt from the rig breaking their left heel, spraining right ankle, and second degree burns on left forearm and right hand (grabbed the handrail to leap over). Accident is investigation underway this week.

Employee was trying to remove the lock pin on the #4 crusher with a pry bar and dropped the bowl on their middle finger.

Employee was working on the stuck clamshell and employee's hand and tool slipped causing the clamshell to come down on the back of the hand. Employee received stitches.

Employee was splicing a belt when EE twisted knee.

Employee was cutting a belt with a knife and it slipped, cutting left pinky finger. Employee received 10 stitches.

Employee was moving a cross member and dropped it, smashing EE's R ring and middle finger.

EE and another employee were moving a motor over to a conveyor. When they reached the pedestal, EE had EE's hand underneath and it got cut.

Employee was helping other employees change out a conveyor when a rock that was lodged in a roller broke loose and shot out at the employee, hitting EE in the chin. EE received 6 stitches and 1 day lost time.

Employee was trying to remove a tooth from a loader bucket with a hammer and part of the tooth chipped and entered EE's abdomen.

Employee was using a hammer when it bounced back and hit EE in the eyelid.

Employee was working on feeder apron and one of the idlers fell on an index finger, smashing it.

Employee slipped on steps and slid down to the bottom of the stairs hurting left ankle.

Employee was walking down the stairs and slipped, catching self on the handrail with left arm. Employee sought medical care on ee own that night and we had ee see another on the 7th.

Employee had called in in April with a personal back injury and has been treated by PCP. EE has been on FMLA for several months and now wants to say this is work related. We are denying this claim.

Employee was using employee's pocket knife to cut a zip tie and cut in between index and thumb, requiring 1 stitch.

Employee felt pain in shoulder after pulling down on a conveyor belt. EE did not seek treatment until 7/9/18 and did not have any restrictions. Was seen again on 7/11/18 and now has restrictions.

Employee was trying to free up a gate under a bin and finger was smashed in the gate.

Employee fell into the discharge chute and hit head, requiring stitches.

Employee was loading rock into a basket when one rolled back and smashed left thumb.

Employee was swinging a sledge hammer when employee felt a pain in employee's back. Employee finished employee's day and when employee came back to work today, employee wanted to go to the clinic.

Employee was coming down out of the haul truck when EE fell on EE's behind and had pain in the back.

Employee was driving a haul truck down a haul road and rolled the truck over.

Employee was working Saturday and Sunday driving on rough terrain when employee's back started hurting. Employee was off on Monday and when employee came in on Tuesday, employee hit a bump in employee's haul truck and hurt employee's back again.

Employee was using a hammer to break up rock in the grizzly bars and a rock came back and struck safety glasses, and injured eye.

Employee was shoveling overhead when employee strained employee's back.

Employee had been using a fire hose to wash out the quarry truck when they realized they had tweaked their back.

Employee was climbing out of the frame at the apron feeder, when foot slipped off the frame and twisted ankle.

Employee was stepping down from the dozer and twisted ankle.

Employee was stepping down off a step when EE twisted ankle.

Employee stepped off an excavator and injured right knee.

Employee was carrying a small steel plate down the stairs when they lost their balance, fell forward, landing on knees.

Employee was using a pick ax to break up buildup under a conveyor and strained his hand. He did not report the injury until 12/16/15 and requested medical attention.

Employee reported that his back became sore throughout the day but did not require medical treatment. On 10/5/2015, the employee requested to go to the clinic for treatment.

Employee was installing a motor when the wrench he was using slipped causing him to lose his balance and fall backwards hitting his head. He also complained of chest and back pain.

The stuck access door the employee was trying to open, fell and struck him in the shin, cutting him.

Employee was turning a wrench, it slipped, causing his left hand to hit the crusher frame. He did not seek treatment until 12/31/2014 and presented with a fracture.

Employee tripped and hit his head on a beam, cutting his forehead.

EMPLOYEE IS UNABLE TO RECALL THE FALL OR ANY CONDITIONS LEADING UP TO THE FALL. EMPLOYEE HAS 5 FRACTURED RIBS, BOTH LUNGS WERE PUNCTURED, 4 FRACTURED VERTEBRAE, AND A SPINAL CORD INJURY.

Employee was replacing a conveyor belt and strained his shoulder and neck. Did not receive medical treatment until 7/11/14.

While tightening a fitting on a scrubber, the employee pulled a muscle in his upper back.

Employee was using a self retracting safety knife to cut skirting when the safety feature failed and he cut his inner thigh. Stitches required.

Employee stepped down from the locomotive, missed the last step and tweaked his back.

Employee was throwing away a conveyor roller and when he tossed it into the metal bin, the housing of the roller slid on the shaft and cut his little finger on the right hand. This created a fracture and a laceration requiring 14 stitches.

Employee was cleaning mill house and fell cutting his head.

Employee was dismounting the haul truck when his foot slipped and bent his left leg awkwardly, injuring his knee.

Employee had been operating the stockpile loader 5/7/12 and 5/8/12. He called in the morning of 5/9/12 that his back was hurting and needed to go to the doctor. He has a low back strain.

At 2:15 pm employee stated that while operating loader he had felt a pain starting in his ribs and working its way to his groin.

Employee was using a prybar to lift roller for repair when the pry bar slipped causing the employee to fall.

First reportable treatment date is 4/25/12 in which he received an injection for a knee strain he did when he stepped in a shallow hole and twisted his knee. He hasn't had anything other than ""first aid"" until now.

He was cleaning the mirror with his hand on the handrail on the Cat truck. The handrail came loose and he fell to the ground. No medical treatment at that time. He decided for medical treatment on 5/20/12 and was released from care with the understanding that if he cont'd to have problems they would need to scope his knee. He had surgery 11/1/12.

Employee was walking down a declining catwalk after getting a rock out of the conveyor.

Employee was walking down the stairs from the Control Room and missed the bottom step, falling and twisting his ankle.

Employee was cleaning sludge from a raised drain pan when the metal lifting strap on the side of the pan broke off and struck him above the left eye.

He stepped off the loader line and stepped on a rock, twisting his ankle.

EE was unhooking the service line to the Delta Wing. the service line got stuck in a tray. he tried to ease the line out when it snapped back and knock him to the ground.

Pushing a wheel barrel and felt a sharp pain in his lower back.

Employee was pulling on the screen on unit 6 and strained his back.

Cleaning area around plant. Removed a piece of steel from pile and the steel twisted, cutting his left forearm. Staples were required.

Was shoveling and shovel abruptly stopped and dislocated his shoulder.

Employee was undoing a hose and turned to look at his supervisor. He felt a pain in his shoulder.

Employee was stepping off locomotive, lost his footing, rolled his ankle and slid down an embankment.

Employee stepped off a block and his knee buckled.

Employee was climbing over a discharge belt and grabbed a V-belt. The weight caused the belt to move, his left hand got stuck in the belt and pullet, cutting off the tip.

EE was using a come-a-long to clean up under the 7x30 and pulled something in his back.

He was changing oil in the WB unit at the wash plant. He felt a pull in the middle of his back when he lifted a 5-gallon drum of oil.

EE was cutting side skirts for 7x30, he got up to get something then went to get back down and cut his leg with his knife on the leg, above the knee.

EE allegedly strained his lower back while pulling on a trailer that was stuck, to get it released. EE did not report accident to the company until 9/15/10 and did not seek medical attention until 9/13/10.

EE was using a pry bar to dislodge clay and rock from crusher slide. The material broke off, and caused the pry bar to kick up and hit him in the face.

Cleaning the window on his truck, had his right hand on the ROPS when the wind blew the door closed on his hand.

EE was welding to install a screen in the CR plant. He felt pain in his left hip. He did not seek medical attention and begin losing time until 16 June 2010.

EE was cutting loose the feedbox on the screen unit. The box flipped when lifted by crane and smashed leg against screen unit.

Injury was using a hammer wrench. A nut came loose and he smashed his finger between the wrench and a speed reducer.

He was removing air tank from truck and slipped, injuring his knee. He did not begin working restricted duty until 1 June 2010.

Employee was cutting a section out of the floor in the mill. He stepped on a piece that he had already cut and fell through the floor.

EE was cleaning the surge bin. He was using a shovel and wheelbarrel when he felt pain in his back.

Injury strained his back using a shovel to pry a block of ice out of a haul truck.

EE was welding a screen and something blew into his eye,

EE was trying to remove a pin from the boom of a backhoe and felt something pull in his lower back.

Injured was using a sledge hammer to close a bin gate. His finger was smashed between the hammer and a metal beam.

EE was cleaning under a conveyor belt. He raised up and heard a pop in his back and felt sharp pain.

Injured EE was using the manlift to service a hoist. He let the boom down on a piece of pipe, lifting a wheel off the ground. He fell from the manlift bucket but was caught by his fall protection.

Injury was walking at the surge bin and slipped, injuring his right knee.

EE was dumping a load of rock over a handrail with a skid-steer loader. The loader tipped forward. EE reached out to try to push away from handrail. His left hand was caught between the handrail and the bucket.

Injury was driving backhoe to Delta Wing, a gust of wind blew his safety glasses off and dirt got in his right eye.

Injury felt pain in his back while cleaning out rock from bin and divider.

Employee was cutting a flap of rubber with a knife. The knife slipped and cut his right leg.

Employee was changing screens. The screen slid down and caught his middle finger, peeling back the skin. No lost time or light duty but stitches were required.

Injury was walking under a belt. He stood up and walked into a second conveyor, hitting his face on the metal frame. The bridge of his nose was injured.

Employee was setting brakes on railcar. When he climbed down, he missed a step and fell. He injured his hand, elbow and shoulder.

EE's arm was hurting from shoveling on the 8th of Dec, then he used a sledge hammer on 10 Dec and hurt it again. He did not seek medical attention until 12/15/08 and began working restricted duty 12-15-08.

Employee was walking from the mill clockhouse to the parking lot and was struck from behind by a fellow employee in his personal vehicle. He fell forward and cut his forehead and knee. His only injuries are scrapes and bruises.

EE was looking in the bins on shuttlefloor. He turned around to go back to the control room and struck his head/hard hat on a piece of angle iron on the gathering conveyor. His forehead above eye was cut and he suffered a mild concussion. Bruised left arm and side.

EE was helping to move a shaft with a strap. The strap slipped and the shaft fell and struck the top of his foot.

EE was trying to insert shims under the scrubber jack while another employee held it up with pry bar. The bar slipped and smashed both of his index fingers. No lost time but stitches were required.

EE was trying to turn an auger shaft with a pipe wrench. The wrench slipped and he fell forward onto his left knee.

EE was grinding a piece of 1-inch angle, when his hand was pulled into wheel on bench grinder. He suffered a left hand laceration.

EE was tightening a valve with a bar, the bar slipped and struck his upper lip. Sutures were required.

Employee was stepping up on back of loader. His right leg gave out and he fell to the ground. His right femur was fractured.

EE was walking from TR-1 conveyor. He tripped and fell, injuring his shoulder.

Employee was stepping off the train and rolled his left ankle. He is working restricted duty.

EE was holding a bearing puller in place while another employee was adjusting a plate with a hammer. The other employee missed and hit injured EE's finger with hammer. No lost time, no light duty, but finger was fractured.

Employee strained his back while lifting a screen.

EE was shoveling on and off on 11-1-07 and noticed some pain in his back. The morning of 11-2-07, he was hurting enough to go to doctor. Strained back, working light duty.

Employee was putting handrails in place when the rail slipped and struck his left knee.

Injured EE was working with another employee to put a water line in. She was holding the pipe while standing on her tip toes. The other employee let go of the pipe and she was left holding it all and injured her ankles. She did not seek medical attention until 25 September 2007 and began on restricted duty the next day.

EE was lifting a sack of grout and felt muscle pop in right arm

EE was getting out of Skytrack and left ankle twisted.

His right ring finger was smashed while he was helping to remove the wheels from a stacker.

Employee was welding and got something in his eye. He did not seek medical attention until 15 Aug 2007 and missed work one day on 15 Aug 2007.

Employee was making a hose for a loader and smashed the ring finger on his left hand. The tip of his finger was amputated.

EE was working on shot, loading primers. He got too hot and overheated.

EE was operating a loader with a broken seat back. The rough road injured his back. He did not seek medical attention until 19 May 2007 and began losing time 21 May 2007.

Driller was stepping down from ladder while dismounting the drill. As he stepped to the ground he stepped on a large rock which rolled causing him to sprain his ankle.

Employee was on the return side of a belt putting in Flexcos. He reached to pick something up and struck angle iron. His ribs were bruised. He is working restricted duty.

Employee was trying to board moving locomotive. He missed the step and fell, injuring his left leg and ankle. There were four days of lost time and he is still working restricted duty.

Employee was using a box knife to cut flap off a wedlok. The knife slipped and cut his right thigh. No lost time or restricted duty but stitches were required.

Employee was changing a unit and cut his hand on a piece of metal on the side of the dust cover. There was no lost time, no light duty but stitches were required.

EE was walking down the steps on the mill and slipped on ice and fell 5 or 6 steps. His back was injured. He is working light duty.

EE was walking down stairs at the Phase 1 building when she fell. She did not seek medical attention until April 2007. She was given restricted duty beginning 05/05/07.

Employee mashed the ring finger on his left hand between the handle and a concrete bucket while pouring concrete out of a bucket. His finger was lacerated. He is working restricted duty.

Employee was unhooking a strap from a crane. He lost his footing and fell off a rockbox at the tail of a conveyor. He landed on the ground and broke the wrist on his left and the upper part of his arm on the right side. He is losing time.

Employee was working with another employee to remove a block bearing from a shaft when the hammer slipped out of the other employee's hand and struck injured in the face. His nose was fractured and he is losing time.

Employee felt pain in his back when he leaned over a pick up a scotch block.

Employee was using a box knife to cut old blending belt. The knife cut his right knee. There was no lost time or light duty but three stitches were required.

Employee was using a fire hose to clean the C.R. Area and experienced weakness in his left arm and tingling, aching and burning in his left shoulder, arm, and elbow. He is working restricted duty.

Employee was on the catwalk at the wash plant. Instead of using the ladder, he jumped from the catwalk to the ground. He landed on a chips pile and strained his right ankle.

EE was working on the feeder. When he stepped away from the feeder, his ankle twisted. His right ankle is sprained. He is working restricted duty.

Employee was using his pocket knife to remove an old O-ring from a hose when the blade lock failed. The blade folded over and cut the middle finger on his right hand. There was no lost time and no restricted duty but three sutures were required.

EE was servicing the portable impactor. While he was carrying the waste oil down, his foot slipped and he sprained his right knee. He is on restricted duty.

Employee was getting a sample off the conveyor belt when he slipped and struck his left side on a brace. His ribs were bruised.

EE was climbing down a ladder on an IT28 (loader) and strained his right ankle.

EE was shoveling material from under railcars and felt pain in his back. His back is strained. He is working restricted duty.

Employee was helping other employees rotate the tire on a Caterpillar 992D loader so they could drain the oil. He felt pain in his back. He sought medical treatment and began working restricted duty on 8/5/05. He returned to full duty 8/12/05.

Employee was cleaning the slide on a tail pulley when the take up slid forward and smashed his left hand. His left finger was cut. EE missed three days of working and is now working restricted duty.

Employee developed lower back pain while loading stockpile trucks at the bins. He sought medical attention on 13 June 2005 and missed one day of work.

EE was walking under the bins & stepped in front of a stockpile truck. The driver of the truck attempted to stop but could not & struck EE. He suffered bruises/scrapes to his left arm/left hip. The accident happened 2:30 am 04/14/05. He missed the night shifts of 04/14, 04/15, 04/16, & 04/17. He returned to work full duty on the evening of 04/18/05

EE was dumping a wheelbarrow of rock that he had loaded. He strained his groin and stomach. No hernia.

EE was shoveling on 15 November 2004 and reported that he pulled a groin muscle. He did not seek medical attention until 19 February 2005 and began losing time 19 February 2005.

Employee was working with another employee to do a kill cable check. He leaned over to see how much rock was left on the screen. When he did, he placed his hand on the motor stand. The other employee turned off the motor and it came down on employee's right index finger. His finger was mashed.

Employee was carrying rock samples from the mill. He missed a step and fell, straining his neck and legs. He began losing time 10/19/04.

Employee was using a sledgehammer to put a timing gear on the shaft on a screen unit. The thumb on his right hand was smashed between the unit and the handle of the hammer. He began working restricted duty on 13 October 2004.

Employee was lifting his toolbox out of his locker and felt a sharp pain in his right elbow. His elbow was strained. He is working restricted duty.

Employee was cleaning railcars and started to slip. He tried to grab a bar and caught his left hand. He sprained his fingers and wrist on his left hand. There were two days of lost time and EE is still working restricted duty.

EE was working with another employee on a Caterpillar truck. The wrong hose had been used to hook up the 3/4"" impactor and when the air was turned on, the hose came loose and swung back and struck EE'S forehead and lip. There was no lost time, but stitches were required.

EE WAS CUTTING A PIECE OF 2""AIR HOSE WITH A DIE GRINDER AND A CUTOFF WHEEL. WHILE CUTTING THE HOSE THE DIE GRINDER SLIPPED OFF OF THE HOSE WITH THE CUTOFF WHEEL CUTTING HIS LEFT HAND. CUT REQUIRED STITCHES.

Employee was cutting a bolt on a belt puller. A hot piece of metal fell on his pant leg, burned through his pants, fell inside his boot and burned his right foot. Employee is off work beginning 4/25/04.

Employee's right knee was bruised while he was kneeling down working on a Caterpillar 773D quarry truck. Employee did not seek medical attention until 19 April 2004. He missed one day of work.

Two employees were in a manlift at the construction site. The lift was inadvertently raised into a beam. One employee was caught between the manbasket and a metal frame. His chin was cut and a vertabra in his neck/back was injured. He is losing time.

EE got out of a pickup truck and set the parking brake. When he exited the truck, the parking brake failed. The truck rolled backward and ran over EE'S leg. His leg was bruised. He did not seek medical attention until 12 April 2004 at which time it was discovered that his leg was fractured. EE is losing time as of 12 April 2004.

EE STEPPED FROM A MANLIFT PLATFORM TO THE GROUND AND TWISTED HIS RIGHT ANKLE. EE IS LOSING TIME.

EE HAD BEEN CLEANING INSIDE A RAILCAR. AS HE WAS EXITING THE CAR, HE SPRAINED HIS LEFT ANKLE.

EE WAS ADJUSTING A 1O INCH WATER VALVE AND STRAINED HIS BACK.

Employee was cleaning out a pickup truck when a piece of metal fell onto his left foot.

EE WAS CUTTING A PIECE OF METAL AT THE CONSTRUCTION SITE. A PIECE OF HOT SLAG FELL ONTO HIS FOOT AND BURNED IT. HE DID NOT SEEK MEDICAL ATTENTION UNTIL 21 DECEMBER 2003.

EE WAS ON THE CATWALK UNDER THE MILL. TRUCK DRIVER WAS UNDER THE BINS IN A HAUL TRUCK. EE HAD HIS PAYCHECK SO HE CLIMBED OVER THE HANDRAIL INTO THE HAUL TRUCK'S BED TO HAND THE DRIVER HIS CHEC K THROUGH THE WINDOW. THE DRIVER NEVER SAW HIM & STARTED TO DRIVE OFF. HE JUMPED UP & GRABBED A WATER PIPE, LEAVING HIM HANGING 14' OFF THE GROUND. HE FELL & SPRAINED BOTH ANKLES.

EE WAS LYING ON HIS BACK OVERHEAD TO WELD A BRACE ON A CONVEYOR AT THE CONSTRUCTION SITE. AS HE REACHED TO PULL HIMSELF UP OFF HIS BACK, HE TWISTED TO GET UP AND STRUCK HIS SHOULDER AGAINST TH E BRACE HE WAS WORKING ON. HIS RT. SHOULDER WAS DISLOCATED. EE IS LOSING TIME.

EE WAS TESTING ROCK IN THE SAMPLE ROOM. WHEN HE LIFTED A SCREEN FROM THE SHAKER, HE FELT PAIN IN HIS BACK. HE CONTINUED TO WORK FOR A FEW HOURS THEN WENT HOME DUE TO BACK PAIN. HE SAW A DOCTOR ON 10/3/03 AND HAS NOT YET RETURNED TO WORK.

EMPLOYEE WAS USING A BOX BLADE KNIFE TO CUT A CONVEYER BELT. THE KNIFE SLIPPED AND HIT HIS RIGHT THIGH. THERE WAS NO LOST TIME OR RESTRICTED DUTY, BUT SUTURES WERE REQUIRED.

EE WAS OPERATING A SKID LOADER. HE REACHED UP TO PULL HISMELF UP OUT OF SEAT AND FELT PAIN IN HIS BACK.

EE WAS WORKING WITH OTHER EE'S TO REPLACE A GUARD ON A TAIL PULLEY. WHILE LIFTING THE GUARD TO PLACE IT IN POSITION, HIS FINGERS WERE PINCHED BETWEEN THE GUARD AND THE TAIL PULLEY. EE IS WOR KING RESTRICTED DUTY.

EE FELT A BURNING PAIN IN HIS LOWER BACK AFTER MOVING A PIECE OF SCREEN CLOTH.

EE WAS MOVING A MANLIFT WHEN HE CAUGHT HIS HAND BETWEEN THE HANDRAIL & AN ANGLE IRON FRAME. THE INDEX FINGER ON HIS RT. HAND WAS LACERATED. NO LOST TIME OR RESTRICTED DUTY BUT SUTURES WERE RE QUIRED.

EE WAS LOADING A WOODEN SPOOL ONTO A TRUCK AND HE STRAINED HIS BACK.

EE HAD BEEN PERFORMING PLANT MAINTENANCE. THAT NIGHT WHEN HE WENT HOME HE SUFFERED GROIN PAIN.

EE WAS WELDING A ROCK BOX AND TOUCHED A HOT AREAWITH HIS LEFT ARM.

EE WAS UNLOADING A BARREL OF OIL WITH A FORKLIFT WHEN THE BARREL SHIFTED AND SMASHED HIS RING FINGER ON HIS RIGHT HAND.

EE WAS HELPING TO DISMANTLE A CONVEYOR WHILE PULLING ON A CABLE. HE STEPPED BACK OFF THE CATWALK, FALLING ABOUT 3'TO THE GROUND. FALL PROTECTION WAS BEING WORN AT THE TIME OF THE ACCIDENT.

EE WAS WORKING ON A CONVEYOR AND WAS WALKING DOWN THE SAFE ACCESS WHEN HE STEPPED TO THE GROUND AND STRAINED HIS ANKLE.

EE WAS ROLLING UP WELDING LEADS WHEN HE FELL AND TWISTED HIS RIGHT KNEE.

EMPLOYEE WAS WALKING DOWN AN INCLINE AND TWISTED HIS KNEE.

EE HAD JUST ENTERED THE MOUTH OF THE TUNNEL WHEN HIS KNEE FELT LIKE IT TRIED TO BEND BACKWARD.

EMPLOYEE FILED A WORKER'S COMPENSATION CLAIM 11-22-02 FOR AN ALLEGED INJURY. THIS CASE IS BEING DENIED BUT EE IS OFF WORK.

EE WAS COLLECTING GUAGE BALLS OF THE #1 CONVEYOR. HE SLIPPED AND STRUCK HIS LEFT SIDE AGAINST THE CONVEYOR.

EMPLOYEE WAS OPERATING A STOCKPILE TRUCK UNDER THE MILL WHEN HER TRUCK WAS STRUCK FROM BEHIND BY A TRAIN AND PUSHED THROUGH THE MILL. SHE DID NOT BEGIN LOSING TIME UNTIL FEB 18, 2003.

MS. GOODWIN GOT A SPIDER BITE ON HER RIGHT ARM. IT IS UNKNOWN IF IT HAPPENED AT WORK OR NOT.

HE WAS DISMOUNTING FROM A LOCOMOTIVE AND STEPPED INTO A HOLE AND STRAINED HIS RIGHT ANKLE.

EMPLOYEE CLAIMS HE CAME INTO CONTACT WITH POISON OAK WHILE WORKING. HE DID NOT REPORT THE INJURY UNTIL 9 JULY & DID NOT RETURN TO WORK UNTIL 16 JULY 2002. THERE WAS NO POISON OAK FOUND IN THE LOCATION WHERE HE HAD BEEN WORKING. THIS INJURY IS NOT BEING TREATED AS WORK-RELATED.

EMPLOYEE STRAINED A MUSCLE WHILE THROWING A SWITCH FOR THE RAILCARS.

EE WAS WAITING TO DUMP LOAD OF ROCK WHEN ANOTHER LOADER BACKED INTO HIS LOADER.

EE WAS CLEANING THE WINDSHIELD ON HIS LOWER AND FELL TO THE GROUND. THE FALL WAS APPROX 11 FEET.

EMPLOYEE STRAINED HIS BACK WHILE CHANGING SCREENS.

EE WAS HELPING MECHANICS PUT GUARD DOOR BACK ON A LOADER AND STRAINED HIS BACK.

EE WAS WALKINF DOWN STAIRS TO THE CATWALK AND STRAINED HER RIGHT KNEE.

EE WAS DRILLING 2 PIECES OF METAL WHEN THE DRILL BIT BROKE. HE FELL FORWARD AND STURCK HIS HAND ON THE BIT.

EE WAS USING A KNIFE TO OPEN A BAG. THE KNIFE SLIPPED AND CUT HIS LEFT HAND.

EE STRAINED HIS BACK WHILE DRIVING A STOCKPILE TRUCK.

EE WAS GRINDING OVERHEAD WHEN A FOREIGN BODY GOT INTO HIS RIGHT EYE.

EE WAS CLEANING THE SHOP WHILE DISCARDING A PIECE OF METAL IT CAUGHT ON HIS GLOVE & FELL ONTO HIS LEFT FOOT

EE SUFFERED SHARP PAINS IN HIS ABDOMEN WHILE OPERATING A STOCKPILE TRUCK.

EE STRAINED RT SHOULDER WHILE USING A BAR TO OPEN RAIL CAR DOORS.

EE WAS CARRYING A PIECE OF PIPE ON A STAIRWAY. HE SLIPPED AND STRUCK HIS ELBOW ON THE HANDRAIL.